Handy 460 Contactless Reader with modem

This card reader is intended for portable use with almost any ISO-14443 card system which require multiple SAM for key storage and require direct communications with an external server through a GPRS communications link.

The unit is housed in a lightweight ergonomically designed plastic case and runs on a 2AH rechargeable Lithium Polymer internal battery. The battery is easily replaceable by the end user. The user interface is programmable and is based on a set of 20 keys and an LED backlit LCD display with a graphical user interface.

The unit is supplied with USB interconnectivity through a micro-USB socket and the styling is designed for end user customisation.

GIS can supply either full customisation and build or a development platform for in-house development.

This unit can be supplied with ITSO accredited software at additional cost.

Available End September 2009

Hardware Specification

32-bit single chip ARM7 secure cryptographic microcontroller
128k bytes internal RAM
512k bytes internal secure program Flash memory
1GBytes of trans-flash for transactions and hotlists expandable up to 2GB
Real Time Clock with independent battery
128 x 64 DOT matrix graphic backlit LCD (8 lines of 20 characters)
Rubber mat keyboard with 19 keys and separate card read key on side of unit
Operates from single Lithium Polymer rechargeable cell
Ergonomic and lightweight case design
Red, amber and green LED for simple user interface
Integrated class 10 GPRS modem with internal antenna and SMS support

Card Interface

ISO14443-A/B
Mifare DESFire, Classic, Mifare Ultralight and T=CL
Read range up to 5cm (typ)
Internal ISO7816-2 ID000 SAM (x2)
ISO7816-T=0/T=1 card interface for 3V and 5V cards
Interface up to 414 kbps

General Information

Weight: 160g
Dimensions: 160 x 66 x 32(max) mm
Operating Environment: 0 to +40C ambient, 10 to 90% relative humidity (non-condensing)
Transit and Storage: -10 to +50C ambient, 5 to 95% relative humidity (non-condensing)